Crane wire ropes

Steel wire ropes deteriorate during use and must be regularly inspected throughout their entire service life. This is essential to ensure the safety of personnel and operations, to extend the service life of the ropes in a safe and cost-efficient way, and to comply with regulatory requirements.

Our steel wire rope inspectors carry out inspections using Magnetic Rope Testing (MRT) in combination with a visual inspection. A standard visual inspection is also possible. All inspections are conducted in accordance with ISO 4309:2017.

Upon completion, a comprehensive inspection report is issued for each inspected rope, including inspection data, photographs, and order information for optimal traceability.

Reeving of steel wire ropes involves carefully threading or re-installing the ropes through the sheaves and pulleys of a crane. This is essential during replacement or maintenance to ensure that the crane continues to operate safely and efficiently.

Reeving of steel wire ropes involves carefully threading or re-installing the ropes through the sheaves and pulleys of a crane. This is essential during replacement or maintenance to ensure that the crane continues to operate safely and efficiently.

With our own fleet of spooling winches, we are a flexible and independent partner. Our portfolio includes some of the largest heavy lift cranes in the world. By meeting the high quality and safety standards demanded by our clients in the oil and gas industry, we deliver the best possible service. We do this in close cooperation with your personnel and other contractors where required, always with a strong focus on safety and awareness.

We offer several options for greasing crane wire ropes. Contact our office for a tailored quotation. Options include manual greasing, spraying, or greasing with a pressure lubricator.

Well-greased ropes have a longer service life, remain more flexible, and are better protected against wear and corrosion directly improving the safety and reliability of your crane

Traditional craftsmanship, combined with modern tools, steel wire rope splicing, and many years of experience, enables us to provide the best possible service.

We replace and maintain ski lift cables for various indoor ski resorts in the Netherlands. In doing so, we ensure that the cables are always safe and reliable and meet the applicable safety standards. Regular maintenance and timely replacement are essential to prevent malfunctions and downtime, and to safeguard the safety of both visitors and staff.

A socket is a conical fitting used to secure the end of a steel wire rope. It creates an extremely strong and safe connection between the rope and, for example, a hook, shackle, or other lifting or anchoring component. Sockets are used in applications where ropes are subjected to extreme loads and absolute reliability is required.

Our service technicians are trained, experienced, and DNV-GL certified for resin socket pouring. In this process, the rope end is cast into the socket using a special resin, creating a permanent and durable connection.

For this, Euro Rope exclusively uses Wirelock® resin, the international standard for socketing. By strictly following established procedures, we guarantee that every connection meets the highest requirements for safety and service life.

With our own fleet of spooling winches, suitable for reels weighing up to 300 tons, we are a flexible and independent partner for the spooling of umbilical cables.

With our own fleet of spooling winches, suitable for reels weighing up to 300 tons, we are a flexible and independent partner for the spooling of umbilical cables.

Our winches can be deployed both onshore and offshore, ensuring safe and efficient operations under a wide range of conditions. All spooling activities are performed in compliance with international safety and quality standards, with full traceability of data and documentation. Thanks to our experience and specialized equipment, downtime is kept to a minimum, guaranteeing reliable performance and continuity of your operations.

With our own fleet of spooling winches, suitable for reels up to 300 tons, we are a flexible and independent partner for the spooling and replacement of anchor wires.

Anchor wires are essential for the positioning and anchoring of ships, offshore installations, and floating platforms. They are subjected to extreme loads and must always be kept in perfect condition to ensure safety and stability.

Our team works in accordance with strict safety and quality standards to guarantee the reliable execution of every project, fully in line with applicable industry regulations. Thanks to our experience and specialized equipment, we can carry out replacements efficiently and with minimal downtime, ensuring that your operations continue safely and without interruption.

Euro Rope has the experience and expertise required for comprehensive overhauls of crane blocks, sheaves, and bearings. During an overhaul, these components are fully inspected, repaired, and renewed where necessary. This includes checking and replacing bearings, repairing worn areas, repainting, verifying dimensions, and carrying out non-destructive testing (NDT).

Since crane blocks and sheaves operate continuously under heavy loads, regular overhauls are essential. They help prevent unexpected failures, ensure safe and reliable operation, and extend the service life of your lifting installation. All work is performed in compliance with applicable industry standards and safety regulations, guaranteeing optimal performance and continuity.

Euro Rope provides comprehensive load testing for all types of cranes, from provision cranes to heavy lift cranes. A load test involves testing a crane under controlled conditions to ensure that it can safely lift the required weight and function correctly. Depending on the application, tests can be carried out using pontoons, water bags, or solid test weights.

Our certified inspectors (EKH) perform both proof load and functional tests, fully in accordance with international regulations and industry standards. These tests not only provide assurance of the crane’s performance but also form an essential part of statutory inspections and safety requirements.

All tests are conducted on an NMi-certified test bed, ensuring accurate and fully traceable results. Whether onshore or offshore, we have the knowledge, expertise, and equipment to perform reliable tests safely and efficiently minimizing downtime and ensuring the safety of your operations.

Pad eyes are fixed lifting points, often welded or bolted onto ships, structures, or offshore installations. They are used to safely lift or secure loads. Since these points must be able to withstand extremely high forces, it is essential that their strength and reliability are tested periodically.

Pad eye testing ensures the safety, strength, and reliability of these lifting points and the welded structures in which they are integrated. Tests can be performed both onshore and offshore using certified equipment suitable for proof load tests (to verify that the point can handle the required weight) as well as break load tests (to determine the maximum capacity).

Our service technicians are highly trained and experienced, carrying out all tests in compliance with international standards and client-specific requirements. For maximum accuracy and traceability, we use hydraulic testing equipment, calibrated load cells, and data logging systems. This provides you with a complete and reliable assessment of the safety and performance of your lifting points.

The in-house test bed at our workshop is NMi-certified, ensuring both accuracy and compliance with international standards. On this test bed, we can load and test components and lifting equipment under controlled conditions. This allows us to precisely determine whether materials and structures can safely withstand the required forces.

We perform both destructive tests (in which a component is loaded to the breaking point to establish its maximum capacity) and non-destructive tests (in which the condition and strength are verified without causing damage). All tests are carried out according to the client’s specific requirements.

Upon completion, you will receive a detailed test report containing all measurement data, guaranteeing full traceability and assurance of the reliability of your equipment.

With our own fleet of calibrated and NMi-certified load cells, shackles, and lifting equipment, we provide reliable support for performing traction tests. During these tests, the maximum pulling force of vessels, tugboats, or installations is measured to ensure compliance with the required capacity and safety standards.

Depending on the application, a traction test can be used for:

• verifying the bollard pull (traction capacity) of tugboats,
• checking the performance of anchor or towing installations,
• demonstrating compliance with legal or client-specific requirements.

All tests are carried out in accordance with applicable industry standards and international regulations. For maximum accuracy, we use certified measuring equipment and calibrated load links and shackles.

Upon completion, you will receive a detailed test report containing all measurement data, including full traceability. This provides certainty about the performance and safety of your equipment and forms a solid basis for both internal quality controls and external certifications.