Material H11: Forged alloy steel quenched and tempered
Safety factor : 5 times
Finish : Galvanized with stainless steel cotter pins
Temperature range : -40°C up to +200°C, Polar Rated
Standard certification : Certificate of Conformity
3.1 material certificate EN 10204
Non-standard sizes or custom products available on request
Ensure that the load is centralized on the pin
When there is too much space in the jaw gap, we advise to use washers
These are available on request.
*Schackles WLL 34 and 60 ton are not supplied with an eyebolt.
| Art. No. | WLL t | MBL t | Thimble Size Inch | A mm | B mm | C mm | D mm | E mm | L mm | X mm | Y mm | Weight kg |
| 38526509 | 34 | 170 | 8½ – 10 | 50 | 65 | 140 | 285 | 115 | 345 | 240 | 425 | 23 |
| 38657609 | 60 | 300 | 11 – 13 | 70 | 76 | 175 | 350 | 165 | 430 | 315 | 541 | 59 |
| 38769009 | 85 | 425 | 14 – 15 | 80 | 90 | 220 | 390 | 178 | 505 | 380 | 604 | 85 |
| 38891029 | 110 | 550 | 16 – 18 | 90 | 100 | 254 | 430 | 210 | 575 | 434 | 675 | 122 |
| 38902119 | 130 | 650 | 19 – 21 | 100 | 114 | 290 | 480 | 235 | 620 | 480 | 755 | 170 |
| 38910009 | 200 | 1000 | 19 – 21 | 125 | 133 | 300 | 600 | 265 | 695 | 550 | 924 | 282 |
| 38925139 | 225 | 1125 | 22 – 24 | 130 | 146 | 333 | 720 | 305 | 735 | 593 | 1075 | 349 |
| Special heavy duty double nut shackle | ||||||||||||
| 32105120 | 200 | 498 | 18 | 105 | 120 | 254 | 500 | 228 | 610 | 464 | 779 | 205 |
| 32115125 | 200 | 498 | 21 | 115 | 125 | 285 | 520 | 238 | 655 | 510 | 797 | 244 |
| 32115126 | 250 | 612 | 15 | 115 | 125 | 220 | 400 | 238 | 595 | 450 | 697 | 203 |
| 32125131 | 250 | 612 | 18 | 125 | 130 | 254 | 500 | 238 | 650 | 504 | 809 | 248 |
| 32125138 | 250 | 612 | 21 | 125 | 130 | 285 | 480 | 260 | 675 | 530 | 800 | 274 |
Tolerance: inside length +/- 7.5%, all other forged parts +/- 5%, machined parts +/- 1mm
Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings.
Screw pin shackles are used mainly for non-permanent applications and pick and place applications.
Screw pin shackles can be used for applications involving side-loading circumstances.
Reduced working load limits are required for side-loading applications.
While in service, do not allow the screw pin to be rotated by a life line, such as a choker application.
Tighten screw pin before each pick.
Safety pin shackles are used for long-term or permanent applications or where the load may slide on the pin causing rotation of the pin.
Safety pin shackles can be used in any application screw pin shackles are used. In addition.
The safety pin type shackle’s secondary securement system, utilizing a nut and cotter, eliminates the requirement to tighten pin before each lift
or movement of load.
